Reliable Chimney Sweep in Atlanta

Receive expert NFPA 211-compliant fireplace maintenance, chimney inspections, and repairs anywhere in Georgia. Our service includes thorough rotary/HEPA cleaning, detailed flue video scans, and precise draft/CO/moisture testing performed with calibrated instruments, along with comprehensive permit-ready photo reports. We professionally manage restoration of fireboxes, dampers, smoke chambers, and masonry utilizing ASTM C270 mortars and listed materials, plus installation of UL-listed liners, stainless caps, and top-seal dampers. Additionally, we expertly diagnose leaks, restore flashing, and implement silane/siloxane waterproofing. Avoid unsafe systems - our certified technicians properly assess hazards and implement code-correct solutions. Here's what you can expect.

Main Insights

• Licensed chimney specialists deliver thorough rotary cleaning, Level I-III NFPA 211 inspections, draft and carbon monoxide testing, and photo-documented reports throughout the state of Georgia.
• Professional fireplace technicians handle firebox repairs, damper maintenance, tuckpointing and smoke chamber parging utilizing professional-grade ASTM C270 mortar compounds and stainless steel components.
• Professional technicians size and fit UL-approved stainless or cast-in-place liners, insulate as needed, and ensure effectiveness with diagnostic and pressure tests.
• We provide comprehensive leak detection and weatherproofing including chimney crown repair, cap replacement, and flashing modifications, along with advanced waterproofing applications and thorough moisture detection and dye analysis featuring pre and post measurements.
• Our focus is on safety and compliance, including clearance verification, code-compliant materials, permit coordination and thorough safety notifications for identified risks, all handled by our insured, credentialed Georgia technicians.

Complete Chimney Sweeping Solutions

Regular chimney cleaning ensures your system stays safe, efficient, and up to code. You can lower fire danger, better ventilation, and comply with NFPA 211 guidelines. A certified sweep examines reachable parts, validates clearance requirements, and records issues. We brush flue walls to perform creosote removal based on accumulation level, then clean residue with HEPA filtration to control soot migration. We remove obstructions, clear the smoke shelf, and verify damper and cap function.

We ensure safe ash disposal, using metal containers with secure lids, placed on noncombustible surfaces as per code guidance. We examine for moisture intrusion, masonry debris, and critter nesting that may restrict ventilation. Prior to completion, we execute a smoke path assessment, confirm carbon monoxide alarms, and deliver a written report with service intervals adapted to your fuel choice and consumption habits.

Professional Fireplace Repair and Restoration Services

If you're facing damaged fireplace components or deteriorating masonry, our certified technicians diagnose the root causes and implement repairs to comply with NFPA 211 and IRC standards. Our team assesses structural damage, water penetration, and foundation issues, then choose appropriate high-quality materials and proper safety clearances. Our service includes professional chimney and fireplace restoration services that optimize draft performance and safety.

We assess and document deficiencies while conducting load-path and hearth support inspections, ensuring proper ember and spark containment. If you own a period home, we stabilize historic mantels, conserve ornate tilework, and integrate discreet steel reinforcement without altering character. Following ASTM C270 standards, we match mortar precisely, repair lintels, and secure surrounds to meet combustibility requirements. We complete our work with negative-pressure testing and comprehensive photo documentation.

Chimney Relining, Caps, and Dampers

Once we restore fireboxes and smoke chambers to code, you need a flue system that vents safely and efficiently. We assess your flue's configuration, alignment, and heating requirements to correctly dimension and place UL-listed liner materials that comply with NFPA 211 and manufacturer specs. Stainless steel liners are ideal for most wood and gas applications; certain gas-only units can use aluminum; damaged masonry can be reinforced with cast-in-place solutions. We add necessary insulation to preserve optimal flue temperatures and required safety clearances.

Proper chimney caps block wildlife intrusion and spark escape while shedding water away from the flue termination. We choose ember-blocking screens with rust-resistant mesh sized to maintain draft.

Our damper solutions provide reliable climate control and energy conservation. Our team checks complete sealing, cable setup, and gasket functionality, followed by performance validation using smoke testing and pressure measurements.

Weatherproofing and Leak Detection Services

You'll prevent expensive water-related problems by detecting common leak sources such as broken crown caps, worn mortar, absorbent masonry, and defective flashing. Our team will detail building code approved flashing and cap upgrades that properly divert water and protect all openings to resist wind-driven rain. For lasting durability, our experts will implement vapor-permeable siloxane/silane waterproofing sealants to the exterior masonry per product specifications and safety regulations.

Typical Chimney Water Entry Points

Even though rain seems to be the primary cause, most chimney leaks begin at common trouble spots: worn mortar joints, cracked crowns, damaged or absent chimney caps, failed flashing where the chimney meets the roof, permeable masonry missing water repellent, and compromised flue liners. You'll frequently notice leaks where roof valleys channel runoff toward the chimney, particularly when gutter obstructions drive water back under shingles. Freeze-thaw cycles widen hairline cracks, permitting capillary intrusion that moistens interior walls, corrodes dampers, and damages fireboxes. Compromised or bare flue tiles can shed water into the smoke chamber. Conduct an inspection with a top-to-bottom approach: examine the cap, crown, joints, brick saturation, and interior moisture staining. Document all findings per NFPA 211 levels of inspection and fix defects with appropriate materials to maintain structural integrity and fire safety.

Flashing and Cap Upgrades

Starting at the roofline downward, water control begins with correctly detailed flashing and a waterproof, regulation-compliant cap. This demands step and counter-flashing incorporated under shingles and into mortar joints, not just surface caulk. Proper flashing repair encompasses removing corroded metal, adjusting laps, and integrating into the underlayment according to IRC and manufacturer requirements. We carefully reset mortar joints where reglets are cut, then we position kick-out diverters to channel runoff from the chimney.

For the upper section, install stainless toppers matching the vent system and crown, with bird- and spark-screening that satisfies NFPA 211. Stainless resists corrosion common in Georgia's humid climate and acidic flue gases. Ensure the cap's edge channels water past the crown edge and anchors mechanically, beyond simple sealant application, to maintain structural reliability and reduce leak pathways.

Waterproofing Sealant Applications

Effective waterproofing commences with a detailed leak assessment, including water and dye testing, moisture meter readings, and assessment of crowns, joints, and masonry porosity. Identify active pathways, then select materials matched to substrate and exposure. Prioritize surface prep: pressure-clean, eliminate efflorescence, repair cracks, renew failing mortar to ASTM C270, and provide proper dry times. Install a breathable silane/siloxane water repellent to vertical masonry to repel wind-driven rain without trapping vapor. Install an elastomeric crown coating with reinforcement fabric at joints for flexibility. Seal flashing terminations and minor voids with UV-stable silicone sealant, working it to channel water. Maintain 2-3 wet-on-wet passes, confirm coverage rates, and observe cure windows. Record before/after moisture readings and schedule reinspection after major storms.

Safety Standards and Regulatory Compliance

Since fireplaces and chimneys are essential safety installations, you need documented inspections that verify safety parameters and regulatory adherence ahead of each winter season and following incidents like fire damage, structural alterations, or lightning events. You need to follow inspection intervals defined by NFPA 211 and local building codes, securing Level I, II, or III evaluations as required. A certified technician will evaluate flue integrity, liner continuity, crown and cap performance, clearance requirements, gas appliance venting, and draft. They'll check for buildup, blockages, water damage, and incorrect vent endings. You'll get a written report with photos, defect categorization, and corrective actions prioritized for safety. When required, we manage permits and re-inspections to verify conformity. Avoid using the system until safety issues are resolved and confirmed.

Supporting Georgia Homes With Reliable Craftsmanship

We provide statewide service coverage, meaning your chimney and fireplace benefit from uniform, code-compliant care across Georgia. Qualified, reliable local technicians comply with NFPA 211 and IRC protocols, confirm clearances, and record all repairs for traceability. We guarantee meticulous workmanship, secure operation, and conformity to manufacturer specifications during every appointment.

Full Service Throughout the State

From the coast to the Highlands, our experienced chimney experts provide comprehensive coverage with standards-compliant maintenance, inspections, and service. We deliver complete coverage designed around NFPA 211 standards, manufacturer specs, and local permitting requirements. With comprehensive urban coverage, we provide rapid assistance for metropolitan areas throughout Georgia, employing HEPA-filtered vacuums, rotary sweeping, and video scan diagnostics to evaluate flue conditions.

Our Rural outreach brings identical expertise to countryside homes and far-off properties. We come prepared for masonry, prefab, and stainless systems, verifying clearances to combustibles, draft performance, cap integrity, and liner continuity. You'll receive comprehensive documentation, visual proof, and scheduled maintenance solutions that meet code. Whether you burn wood, gas, or pellet, we standardize safety checks statewide to keep your system reliable.

Experienced Local Technical Team

While statewide coverage is important, confidence comes from local service. You need a local technician who knows Georgia's weather patterns, fuel types, and local regulations. Our crews bring proven professional credentials, insurance documentation, and calibrated equipment for testing ventilation, carbon monoxide, and humidity. They adhere to NFPA 211 and IRC standards, capture problems with photos, and deliver detailed project scope, required permits, and post-service documentation.

Safety is our top priority with detailed Level I-III evaluations, featuring cap and crown inspections, flue liner evaluations, and professional masonry or factory-built repairs using listed materials. You'll receive detailed timeframes, proper containment for soot control, and comprehensive safety verification tests.

By engaging with communities, we inform neighborhoods on the dangers of creosote, risks associated with dryer vents, and periodic upkeep. Local accountability ensures quicker service, dependable service, and professional code-adherent service.

Common Inquiries

Are There Emergency Same-Day Chimney Repairs Beyond Business Hours?

We offer emergency same-day chimney services. We maintain after hours availability for emergency repairs, including weekend hours, when safety or code compliance is at risk. You'll speak with a technician who assesses hazards, drafts a NFPA-compliant solution, and sends a crew for stabilization, venting, and interim weather safeguards. We document findings, focus on carbon monoxide and flue safety, and schedule follow-up permanent repairs. Contact us now for fastest emergency response and clear pricing.

What Areas of Georgia Do You Service?

Our service area extends across North Georgia through Metro Atlanta and into Coastal Georgia, covering all your needs. We operate in key locations such as Atlanta, Marietta, Roswell, Alpharetta, Gainesville, Athens, Rome, and extend to Savannah, Pooler, Richmond Hill, and surrounding coastal communities. All inspections and repairs are completed following NFPA 211 standards, maintaining read more IRC/IFGC clearances, and utilizing UL‑listed components. You'll receive comprehensive documentation, complete with photos and safety-focused recommendations to ensure your system stays code-compliant and dependable.

Are All Your Technicians Licensed, Insured, and Background Screened?

Rest assured that every technician we employ comes with complete credentials, insurance coverage, and background verification. We routinely confirm state licensing compliance and hold extensive general liability and workers' compensation insurance. Our professionals arrive in uniform and are certified in compliance with NFPA 211 standards, IRC/IMC code, and manufacturer specifications. We gladly provide documentation of all certifications upon request, and our team always arrives with proper identification. We prioritize safety by conducting thorough safety briefings and identifying potential risks before starting the job.

Can I Get a Written Estimate with Clear Pricing Details?

We provide clear, written cost estimates upfront. With 64% of homeowners mentioning surprise costs as their biggest concern, we eliminate guesswork by providing comprehensive breakdowns and flat rate pricing before any work begins. You'll see labor, materials, scope, code-required components, and safety upgrades clearly listed. We record NFPA 211 compliance, highlight any hazards, and won't proceed without your approval. Zero surprise costs—just transparent, code-compliant pricing following best practices and safety.

Can I Schedule Online and Get Appointment Reminders?

Online scheduling and reminders are available. Our online platform allows you to select convenient appointments that comply with NFPA-211 safety standards for access and ventilation. You will set your preferred reminder options (email, text messages) and get booking verifications, prep guides, and safety compliance notices. We verify your address, flue type, and clearances to make certain correct tools and PPE. Easily reschedule or cancel online, and we'll send you modified alerts and safety advisories if weather or ventilation conditions shift.

Closing Remarks

Choose Georgia's trusted chimney cleaning and maintenance specialists, and you'll maintain consistent warmth while meeting all codes with confidence. We deliver comprehensive sweeps, professional repairs, and chimney relining that preserve airflow and structural integrity. We install caps and dampers that prevent entry of pests and dampness, diagnose leaks, and protect against severe storms. Every visit features thorough NFPA 211-aligned safety evaluations and detailed documentation. Trust in our skilled craftsmanship that focuses on your residence's security, functionality, and adherence to standards-so you can use your fireplace worry-free.